Work of our service is supported by TVs and BD players of Samsung with support of SmartTV which are released from 2012 to 2014 (E, ES, F, FS, H, HS, HU). On models of 2015 (J, a JS, JU series) installation only is possible if the version of an insertion isn’t more senior than 1400.
Installation of the Widget can be executed in two ways:

1. With USB Flash memmory:

  • Download the Widget kingmodiptv.zip.
  • Unpack zip archive of a widget kingmodiptv.zip in the  new folder .
  • Copy folders with contents on the USB stick.
  • Insert the USB stick with a widget into the switched-off TV, a BD player or the home theater.
  • Turn on the device and enter in SMART HUB .
  • The widget has to appear in the main list.

2. By means of the synchronization server in regime of the developer:

This way of installation is various for models of different years of release. The short instruction for each of the supported model years is given below.

  • Entrance under the user «develop»:

    Press the “SmatHub” button on the remote control;
    Press the red button (input);
    In the “Save SMS” field, type develop. The password will substitute itself. Press the “enter” button;
    While in the “SmatHub”, use the Tools key to open the “Tools” section;
    Open the “Settings” menu;
    Select the “Developer” option; put the “Accept OK” checkbox

  • Addition of the new IP address:

    Select the “Server IP address” setting. (IP Address setup);
    Enter the IP address: 163.172.211.149
    Update the list of widgets: select “Synchronize user applications” (Synchronize user applications);
    After the end: exit SmatHub → go back → installed applications will appear at the end of the list. Attention: on some models of TVs of 2012 the user develop already exists and you do not need to recreate it.

  • Entrance under the «develop» user:

    Click on the normal Menu panel (or the Misc button on sensor, by arrows is brought to the Menu button on the screen panel)
    Select the Smart Functions menu item
    Select account ” Samsung”, and select “Input”
    Use: develope mode
    Tick off “To remember the password”
    Click “Input”
    Quit the menu

  • Addition of the new IP address:

    Go to the “SMART” menu, and select “Advanced”. (at the bottom of the screen);
    In the menu “Add. press the “Options” button (options);
    In the “Settings” menu, select the “IP Setting” line and enter the IP address 163.172.211.149;
    Select the “Start App Sync” line to install or update the application, wait for the download to finish.

  • Entrance under the «develop» user:

    Open “TV Menu” → select “SmartHub” → “Samsung Account”;
    In the menu that appears, select “Log in” → next under “Sign in”;
    In the opened window we enter the login “develop”, the password is not needed → at the bottom We put a daw and we press the button “Sign in”; .

  • Addition of the new IP address:

    Then go to “Smart Hub” → put the cursor on one of the applications → press the central button-cross the console and hold it until the “Context menu” appears;
    In the menu that appears, select “IP Setting” → then enter the IP address in the window that appears, enter: 163.172.211.149
    Put the cursor on one of the applications again → press the central button of the console and hold it until the “Context menu” appears and select “Start User App Sync”;
    The installation process starts. After the end of the synchronization process, the applications will be installed either on the Main Page “Smart Hub” or on the additional one. The end of synchronization (since its scale is absent) can be judged by the symbolundefined In the form of arrows in the left corner of the list of installed applications;
    For the application to appear in the “SMART HUB” you need to exit it and go back in again. undefined

Installation only through a USB drive and only on devices with firmware no higher than 1400:

Preparing a USB-flash drive, Format the partition in FAT32.
After successful formatting, create userwidget folder
load the kingmodiptv.zip widget into the folder.
USB-Flash is ready, it remains to connect it to the TV.
After connecting USB-Flash, the TV section of your TV should be open on TV, your TV will detect USB-Flash and installation of applications will automatically start, and you can watch the progress of installing widgets at the top of the screen.
After successful installation of widgets, go to the MyAPP section and you will select the application you have installed.

  • Install Red bull TV, or Russian music, Karaoke, Pluto TV.
  • Open  TV menu, go settings / network / DNS network status / change to 46.148.26.117 )
  • Save, Exit, Restart the application and enjoy watching. ))

  • The PC from which the widget will be installed and the TV must be connected to the same home network.
  • Download the archive with the program installer (DOWNLOAD), or self-extracting archive with installer program (DOWNLOAD)
  • Disable temporarily antivirus and firewalls of your PC that can block network connections.
  • Unpack the archive on the hard disk of your PC, self-extracting archive unpacks the files into the directory by default c:\KingModTizenInst\
  • Find in the folder in which you unpacked the contents of the archive to install the file KingModTizenInstall.exe, right-click, and select “Run as administrator”. If you use a self-extracting archive, the program will start automatically after auto-unpacking.
  • Next, follow the instructions given in the installer program window.
  • After the installation process is finished, it is advisable to restart the TV by power (Turn off the power outlet, press the POWER button several times on the remote control, plug it in and turn it on as usual with the remote control’s POWER button).
  • If everything is done correctly, then the SmartHub in the MyAPPS section should contain the KINGMODIPTV widget, which you can attach to the main screen in the widgets lines
  • Do not forget to turn on again firewalls and firewalls disabled at the beginning of the installation

 

ATTENTION!!! Installation using a PC and an installer program on TVs of the J series (2015), with models J5500 and above with firmware versions above 1400, is possible, but after rebooting the TV it deletes all the widgets installed in this way. Therefore, for such TV use only run through our DNS server.

For “advanced” users who are able and willing to install a widget in developer mode via Tizen Studio: You can download the widget directly here. What to do with it – you know yourself. Who does not know – does not suffer and comes through the substitution of DNS or install from a computer.

To view a complete list of devices, click on the table cell




Совместно с PAYSTO